Illustrate
V-cone flowmeter can measure gas phase, mixed gas phase, liquidoid, mixed liquidoid, gas-liquid phase (quality ratio of moisture and liquidoid is ≤5%), powder, dirty liquid with high viscosity, high velocity of flow and suspending solid particles, liquid vibration, electromagnetic interference and other media values under various working condition (temperature and pressure).
Summary
V-cone flowmeter is a new type of high-precision flowmeter that can accurately measure all kinds of Reynolds number. It can meet application condition of a variety of media that its operating principle should be the same as the principle of differential pressure of other types, both of which are based on conversation of energy theorem in sealed pipeline. V-cone flowmeter has a better performance for its unique design structure.
V-cone flowmeter hangs in the center of the pipeline a cone-shaped throttle piece, which impedes the flow of media, reshapes the flow curve, and immediately forms a meiobar in taper downstream pipeline. There is a pressure difference between the positive pressure in upstream pipeline and the throttled negative pressure in downstream pipeline. Extract the positive and negative pressure using extraction orifice with negative pressure orifice put in the upstream pipeline and the negative pressure orifice at the bottom of the cone. By measuring pressure difference, you can calculate the pipeline’s flow based on Bernoulli equation. The cone is in the pipeline center so as to optimize media flow curve. Thus this flowmeter enjoys a higher accuracy with lower requirements for upstream and downstream ascending pipe.
V-cone flowmeter can measure gas phase, mixed gas phase, liquidoid, mixed liquidoid, gas-liquid phase (quality ratio of moisture and liquidoid is ≤5%), powder, dirty liquid with high viscosity, high velocity of flow and suspending solid particles, liquid vibration, electromagnetic interference and other media values under various working condition (temperature and pressure). The fluid condition ranges from profound hypothermia to super-critical condition. The highest working temperature and pressure respectively reach 850°C and 42.0MPa, which can be higher with special material. The Reynolds numbers it can measure range from 500 million to 8000 or even lower. In addition, it produces full-scale pressure difference signals from lower than 0.1KPa to the highest scores KPa.
V-cone flowmeter with flange taps (VF), using solid cone closure fluid and flange taps on the wall, and coupled with remote differential pressure transmitter, can effectively prevent the pressure port being stopped. It is suitable for media containing solid particles of dust, liquid with high-viscosity and dirty media.
